Ducati – Procurement Manufacturing

3KVCC Overvoltage Limiter

Sat, 11 Jun 2016 05:21:14 +0000

DUCATI Energia has realized the Voltage Limiter (unidirectional and bidirectional) for ground TE protection circuits for lines at 3KVcc, both on planning and application level. The task of this device is to ensure an electric safe connection between the ground TE protection circuit and the TE back circuit of the Italian Railway Networks 3KVcc supply … Continue reading →

Alternators

Sat, 11 Jun 2016 05:19:04 +0000

Ducati Energia alternators are permanent magnets generators available in a power range of 60 W 5.000 W and diameter between 95 mm and 180 mm.
The alternators are designed and customized to fit the specific application and are made in according to the last technologies available like the Neodymium Magnets.
The application range is very wide and include the following fields:
– Engines for 2/3 wheels vehicle
– Marine engines and steady state diesel engines
– Wind and hydraulic turbines
– Fitness equipments
– Power generation equipments and engine-driven welders

To fit in several applications, the alternators are available in different configurations in order to supply electric power since the lowest engine rpm.

BCA2002 – TDS

Sat, 11 Jun 2016 05:20:53 +0000

Axle counter for train distance in accordance to I.S. 11005C and CENELEC 50126, 50128, 50129, 50159-1, 50124-1.

BCU (Bay Control Unit)

Sat, 11 Jun 2016 05:20:47 +0000

CDI

Sat, 11 Jun 2016 05:19:07 +0000

The CDI made by Ducati Energia are combined with the alternators optimizing the engine combustion. The CDI are available in analogical and digital type and can be used on all the engines 2 and 4 strokes. The CDI can manage inputs as gear switch and map switch and optimize the engine combustion to the different … Continue reading →

Charge Points for Electric Vehicles

Sat, 11 Jun 2016 05:42:47 +0000

The charge points for electric vehicles are fully integrated in a network that connect altogether the energy provider and the end users/electric vehicles.
The charging points are designed in according to the recent standards of the European Community and are compatible with all the vehicles available on the market. The charge points are available for outside use (parking, public and private areas) with steel body anti-vandalism or inside use (private garage) with plastic body. High level of customization both of the bodies (colour, shape, dimensions, etc) and of the software in order to meet the specific request of the energy provider.
All of the charge points can be provided with RFID technology (user identification) and with a remote connection to the central office that can monitor the status of the network.

Com5D

Sat, 11 Jun 2016 05:19:58 +0000

Only for the Italian market.

Dat Più

Sat, 11 Jun 2016 05:19:38 +0000

Datalogger for data acquisition and storing of up to 99 Ducati Analysers.

Digital Fault Recorder

Sat, 11 Jun 2016 05:20:29 +0000

The Fault Recorder is a digital recording device capable of acquiring and simultaneously memorising up to 32 analogue and 128 digital inputs. All analogue and digital inputs, as well as the power supply are galvanically isolated (from one another and in relation to earth) for up to 2kVRMS. The digital fault recorder is fully configurable and programmable using a personal computer connected via serial port or Ethernet. The application program of the device can be updated locally and remotely. The housing is made entirely of steel and fitted with handles; its dimensions are standard for a 19 rack (9 units high, 400mm deep) and it can be supported purely by the fastening screws on the front. The protection level is IP30 in the front and IP20 in the other areas. Connections are executed by means of screw terminals suitable for receiving flexible conductors up to 4mm2 for analogue inputs and up to 2.5mm2 for other inputs.

DLC

Sat, 11 Jun 2016 05:20:12 +0000

Data Link Converter. RS485 /RS232 converter, to be used in Ducati analysers networks.